Skip to main content

FREE Shipping Now Available on Orders $50+ (excluding oversized items)

Why shop at Mad Dog Cycles? Learn more about our promise here!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$8.53 - $147.15
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$159.99 $209.99 24% Off
Our best pair of lights. Daytime running lights for visibility, and Kindbeam that lights the way while staying out of oncoming riders' eyes. Do the (b)right thing A ready-for-anything light set that pairs Daytime Running Light visibility with the bright commuter Pro RT front light. Kindbeam keeps more light on the path ahead of you while avoiding oncoming riders' eyes, for a bright light that won't blind oncoming riders. It's equipped with a visible fuel gauge, wireless connection to tail light, and charge-back that allows you to use the light as a battery bank to charge gadgets. All buttoned up with a Flare RT for the top light package for any ride. - See and be-seen light set for everything you need to ride with lights every ride, day or night - Commuter Pro RT with Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Flare RT provides ultimate visibility for any road, city, or path - Specifically designed focus, flash, and range flash patterns for daytime visibility for up to 2km - Commuter Pro modes: high 1000LM — 1.5hrs, low 500LM — 3hrs, day flash 300 LM — 12hrs - Flare RT Flash modes: 90LM — 6hrs, 45LM — 12hrs, 5LM — 15hrs, Steady modes: 25LM — 4.5hrs, 5LM — 13.5hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included USB-C and micro USB cable
$161.99 - $189.99 $179.99 - $189.99 Up to 10% Off
Need to haul a little more? These durable, weather-proof panniers are the answer. - 4.5 kg / 10 lbs. carrying capacity per side - 11.2L volume per side - Drain holes stop water from pooling - Includes all installation hardware - Do not exceed a gross vehicle weight (bike, riders, cargo) of 200kg (440 lbs.)
$159.00
Make the most of your Tilt Balance Trainer with the Repair Stand Attachment. Use it on the floor as a traditional repair stand, or hang it on the wall to save floor space. *Must be used in conjunction with Tilt Balance Trainer* Durable anodized 6061 aluminum construction 60 lbs capacity No plastic teeth to strip Multiple use modes Floor mode Wall-mount mode Solid and secure with no risk of tipping over
$155.95
The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: -  Two 20 mL syringes -  Two hose assemblies with shutoff clips -  One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems -  One open-ended hose assembly -  Bleed funnel with stopper -  Two 10 mm/12 mm universal bleed blocks -  Two 11 mm bleed blocks -  Two adjustable syringe holders -  M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2) -  M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2) -  M6 x 0.75 adapter — Magura® -  M6 x 1.0 adapters — universal (x2) -  M6 x 1.0 adapter — Promax® -  M7 x 0.75 adapter — Shimano® -  Hose compression sleeve — universal -  Fluid disposal bag -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.
$199.95
A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools. The SK-4 includes: - AWS-10 Fold-Up Hex Wrench Set - BBB-4 Big Blue Book of Bicycle Repair - CC-3.2 Chain Checker - CN-10 Professional Cable and Housing Cutter - CT-5 Mini ChainBrute Chain Tool - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HR-8 8mm Hex Wrench - MLP-1.2 Master Link Pliers - SD-2 Shop Screwdriver: #2 Phillips - SW-7.2 Triple Spoke Wrench - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench
$135.00
Featherweight wireless helmet light for singletrack. Want a helmet light that is actually a light designed for helmets? Not just a flashlight? Then you've come to the right place Hangover borrows its name from the famous trail in Sedona, AZ (not the dreaded “brew flu”). Into it, we poured every ounce of our automotive optics knowledge, creating the most compact, bike light anywhere. But slim does not mean dim. Some serious late-night thinking went into the Hangover, with countless hours prototyping the perfect beam pattern for trail riding and for helmet mounting. The resulting optics fills your entire field of vision with light, not just a spot down the trail. So, you can avoid what you want to miss, and hit what you really want to shred. Good for 90 minutes of strong output, with the ability to USB speed-charge on the go, and yet only 100 grams. USB-C quick charge 3.0 is included as standard. These lights are proudly and expertly made right here in Chicago, with the help of good coffee, homegrown talent, and a couple of dogs in the shop.
$149.00
- Your favorite Shotgun products, now in one combo package! - Includes the seat, the handlebar, and 2 exclusive items: One mudguard and one stem cap. ABOUT THE SHOTGUN KIDS MOUNTAIN BIKE SEAT: - Front mounted child seat for kids 2 – 5 years - Full rubber protection (for alloy or carbon frames) - Adjustable width and angle to fit all mountain bikes - Quick release fitting for easy installation and removal ABOUT THE SHOTGUN HANDLEBARS: - Accessory for the Shotgun Kids MTB seat - Allen key fixing for easy fitting, removal and adjustment - 250mm in length, with rubber grips designed for little hands - Comes with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diameters - Suitable for flat or riser style handlebars
$199.99
Make every ride count with Edge 130 Plus. Never stop cycling with this compact GPS bike computer. Whether you ride to explore new trails or to save the planet in your daily commute, go with Edge 130 Plus. - No more excuses. Wirelessly sync workouts right to your Edge device. - Are we there yet? The ClimbPro feature helps you gauge your effort on a hilly route. - Know where to go. Thanks to easy-to-follow navigation with turn prompts. - Extra awareness and incident detection. Peace of mind for you and your fans back home. - Stay in touch while you’re on your bike with a variety of connected features. - Get more from every charge — up to 12 hours of battery life in GPS mode. In the box: - Edge 130 Plus - Standard Mount - USB cable - Tether - Documentation
$152.99 $179.99 15% Off
Extend your ride with the Garmin Charge power pack. This external battery pack plugs directly in to the Edge 1030 cycling computer, giving you up to 24 hours of additional battery life. It even fits into the new streamlined bike mount. You can charge on the go by connecting the Garmin Charge power pack to any compatible fitness device with an additional cable — including wearables and other cycling computers. Just connect the power pack with a USB charging cable so you can stay in the action and get the most out of your activities. - Bike mount sold separately or included with the purchase of Edge 1030 - Wearables with wrist-based heart rate that use a plug-based charger cannot be worn while charging
$199.99
Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation
$188.48 $235.60 20% Off
This single e-bike light is an extremely light and compact unit, making it perfect for both fast road cycling and commuting. It automatically adapts to 6V or 12V voltage so it is compatible with most motors including Bosch, Brose, Shimano, and Yamaha systems. - Up to 1400 lumens depending on battery and motor combination
$166.49 $184.99 10% Off
Bring your best friend. Dog. Cat. Bunny. Iguana. Whatever. Don't leave home without them! Now your BFF can tag along on every ride to the farmers market, dog beach, or local pub. Bring your four-legged friend along for your two-wheeled ride. - Allows pets to enjoy the ride while protecting them from jumping out - Made of durable, non-toxic plastic - Wire dome made of steel and cushion for comfort - 33 lbs. capacity - Complete with an MIK system - For bikes without an MIK-compatible rack, the MIK Carrier Plate can be purchased separately - Compatible with select Electra bike models - Dimensions: 43 x 33 x 22cm - MIK Carrier Plate pictured sold-separately
$14.99 - $320.75
Dumonde Tech worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X REGULAR Bicycle Chain Lubricant Everyone who has tested or raced using PRO X reports that performance is better than any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X REGULAR brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little effort is used to move your bike parts. - 10 times higher lubricity than Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, lasts longer, and runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X REGULAR is the heavier version to our PRO X LITE chain lubricant. PRO X REGULAR is ideal for Mountain Bike, Cyclocross, and all extreme condition, while maintaining a clean drive train. PRO X REGULAR can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, used sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions.
$11.95 - $133.50
Dumonde Tech’s Classic Liquid Grease is a high-performance replacement for traditional viscosity grease. Liquid Grease reduces the coefficient of friction through Polymer Technology. Liquid Grease polymerizes and bonds to the surface providing extremely low drag. Liquid Grease is attracted to heat to provide lubrication at critical locations. Highly recommended for steel and ceramic cartridge bearing. Eliminates drag that grease-packed bearing experience for a drag-free bearing, even in the freezing temperatures. Ideal for suspension fork legs, full suspension pivots, wheel bearings, and roller bearing. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross.
$134.99 $149.99 10% Off
The Bontrager Commuter Double Pannier delivers versatile capability to your bike so you can carry more and ride more. The integrated MIK mounting system makes installation and removal a breeze with compatible MIK racks. Additional accessory pockets and an easy-to-load main compartment add functionality to this durable, symmetric design made from waterproof materials. - MIK mounting system provides secure, integrated mounting with compatible racks - Made from durable, waterproof material to help keep your gear safe - Large compartment holds shape for easy loading and unloading with roll-top buckle closure - External pockets and compartments help organize accessories and gear - Sturdy handle pairs with MIK system to make this double pannier easy to remove and carry - Reflective materials enhance visibility with a stylish finish
$148.49 $164.99 10% Off
Everyday utility The MIK Utility Trunk Bag with Panniers offers simple and secure on-bike storage that's easy to install and remove without the need for tools. It has multiple pockets to keep you organized, built-in panniers for extra carrying capabilities, a durable design with reflective materials,Everyday utility and built-in rain cover to keep you and your gear safe and secure in all conditions. Product details - MIK mounting system provides secure, integrated mounting with compatible racks - Front and rear black reflective materials enhance visibility with a stylish finish - Integrated panniers offer expandable storage and easily stow in pockets when not in use - Stay organized with internal mesh pocket and two side pockets, each with a smaller internal pocket - Zippered pocket with soft lining provides secure phone storage accessible from top of bag - Be ready for weather with an integrated rain bag securely stowed in rear pocket - Light loop for easy rear light mounting - Adjustable carrying strap for convenient off-bike use Specifications - Cargo capacity: 2200 cu in (36.1L) - Bag type: Trunk bags - Dimensions: 35cm (l) x 20cm (w) x 20cm (h) - Attachment: Interchange - Material: Woven
$159.99
A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle
$192.00
When race day arrives, the last thing you want to worry about is organization. The Zipp Transition 1 Gear Bag has multiple compartments to keep your essentials easy to find and converts quickly from backpack to duffel with a removable shoulder strap. A top molded pocket protects valuable items like cell phones and sunglasses, while a large ventilated lower compartment keeps shoes or wet clothes separated from the main hold. Camera bag-style dividers, an adjustable helmet pocket, and water-resistant fabric further extend the Transition 1's versatility, providing race-day relief from basic, cluttered alternatives. - Center compartment includes camera bag-style dividers to keep items organized. - Large ventilated lower compartment for shoes or wet clothing. - Adjustable helmet pocket. - EVA top pocket. - Side net for water bottles. - Reflective tabs. - Total volume of 56 liters
$140.95
Introduction - Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years. - Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag. Storage - We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP. - As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG. - Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG. Hydration - With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers. Adjustable Mounting - One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation. - In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions. Lightweight - We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams. Bottom Line - The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros! Includes: - Carbon Sonic chassis - One Pair X-Straps - All hardware and instructions Material - Carbon Fiber proprietary unidirectional orientation. Weight - Chassis 49 grams, Hardware 30 grams. Total 79 grams Limited Lifetime Warranty - Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.
$162.95 - $169.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)
$139.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
$144.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle and 5mm quick release bikes
$125.00
- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT
$170.00
- Essential bottom bracket bearing extractor set - (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor
$160.00
- Bearing extractor set for medium bearings - (1) 6002, (1) 6003, (1) 6804, (1)6805
$197.00
- Drift and over axle set for less common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents
$187.00
The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the adjustable press stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings. - machined aluminum handle and drifts - red anodized drifts and handles - zinc-plated 1/2" diameter threaded rod - long threaded rod works with long head tubes up to 250mm includes - 1 head tube drift includes - 1 headset cup drift - 1 adjustable press stop - 1 threaded handle includes on 1/2"-13x17" unc threaded rod
$160.00
- Bearing extractor set for small bearings - (1) 608, (1) 609, (1) 6000, (1) 6001
Page 1 of 8 Next page