Commuter

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters

Don't let the tiny size fool you. Mirrycle's Incredibell Bellini is little, light and gets noticed! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Weight: Black & Silver 17g, Brass 28g - Dome Diameter: 28mm (1.1") - Fits handlebars with 21mm – 22.6mm (.83" – .89") outside diameters

Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.

Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.

- Fits 22-25.4mm Handlebars

- The Basil Sport Design Handlebar Bag is a stylish bag with a generous capacity of 7 litres. - Additional reflective trims enhance your visibility at night. - This bag is ideally suited for taking a smartphone with you whilst cycling. - This steering axle bag is designed with high-quality polyester, ensuring a longer service life. - Perfect for an e-bike.

- Double bag, high-graded material - Main compartment with pull cord - Double side pocket - Topside with two bands for LED/straps/child's seat/spring clamp - Safety reflection - Strap mounting system

- The Basil Navigator Waterproof features a roll-top closure with an additional adjustable hook. - Thanks to the handle and shoulder strap, you can easily take the bag anywhere. - Waterproof (IPX 3). - Includes a reflective elastic front pocket.

Our Utility Frame Strap & Waterproof Cargo Bag Bundle is the perfect add-on for any rider. You'll get the all-new Utility Frame Strap, which is a super tough strap to secure riding essentials to your frame, whilst our Cargo Bag will keep everything dry and protected against the elements with its epic levels of waterproofing. You'll be able to mount a spare inner tube, C02 inflator kit, Rim Stix, and your other favorite on-the-go repair tools with ease, so you're prepared for anything your ride throws at you! Don't let a puncture hold you back on a ride. Store all your riding essentials on your bike frame with the Muc-Off Cargo Bag and Utility Frame Strap. It's waterproof, tough, and durable, withstanding the harshest conditions. HIGHLIGHTS: - Capacity - Fits up to a 29" tube, CO2 inflator Kit, tire levers, money, cards, and more! - Waterproof bag with welded seams - Abrasion-resistant and made from long-lasting materials - Roll-top strap and buckle closure system - Protects accessories from water, snow, mud, dust, and sand - Long adjustable strap means it can be fitted on most frame tubes - Durable and tough as nails webbing with bar tack stitching is designed and built to last - Super strong hook and loop fastener allows quick and easy removal and installation - Flexible, high strength elastic loop system with super grippy rubber tubing fits a variety of inner tube sizes and other items - Specific CO2/tire lever elasticated straps keep your items safe and secure without rattling around - Crazy grippy backing material means your loaded strap stays in place over the harshest terrains WHAT'S INCLUDED: - 1 x Utility Frame Strap - Black - 1 x Waterproof Cargo Bag - Black

Designed to fit the Surly 24-Pack Rack, Surly's updated Porteur House Bag features a versatile strap system that gets along with a variety of Porteur-style racks. Simple to install and remove, it's been tweaked to be even better for commuting and light weekend camping. With a structured body to stabilize your cargo, an integrated nylon liner, a handy roll top for accommodating bulky items, and more pockets than your old cargo pants, the Porteur House Bag makes unwieldy loads decidedly wieldier. - Includes two One-Wrap straps and one accessory bungee for securing loads of different shapes and sizes - One large main compartment, two front pockets, and two additional pockets on both sides of bag - 30-lb. bag capacity. Consult your rack's weight limitations - Dimensions when Rolled: 370 x 280 x 240mm - Dimensions when Unrolled: 370 x 280 x 440mm - Main body 1680D nylon, Liner 400D nylon. Bag fabric and hardware are bluesign Approved, which means the materials are sustainably produced to have the lowest possible impact on people and the environment - 18L volume Specifications: - Number of Compartments: 7 - Access Style: Roll Top - Primary Material: 1680D Nylon with polyurethane coating - Waterproof: No

DT Swiss Wheel bags

- Stylish bike accessory for your bike through beautiful bohemian print. - Makes a resounding ding dong sound.

The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz

Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

A weather-resistant, bikepacking-inspired / urban-inspired seat pack bag with built-in accommodation for a U-lock. Ideal for the commuting trunk bag user who doesn't want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Water-resistant stitched construction. - Heavy-duty seat rail buckle and straps, pull up to tighten. - 3 rubberized, modular seatpost straps with CAMLOCK, ensure things stay tight, while eliminating potential damage to clothing. Can use 2 or 3, in varied positions. - Top mount bungee system with wings, provides optimum stability to top loads, etc... - Top bungee system for additional, flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle, ensure ample leg clearance, even if heavily loaded. - Built-in U-lock holder. - Rear light clip.

This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.

- Waterproof - Reflective Elements - Mount for clip on light - Spacers for handlebar spacing - 9 Liters 700x315mm - 2.4 gallon 27.6x12.4in

This wedge bag has two compartments with foam inserts to keep tools jiggle free. - Features durable 1000 denier, wrap-around zipper, extra-long 3M reflective strip for added safety at night and a zippered expanding main compartment for added storage. Mounts and removes quickly with the innovative QuickClick system. - Built-in rain covers and two-piece rail fixer for easy removal Tool Kit Includes: - 2, 3, 4, 5, and 6mm Allen wrenches - T25 Torx - Phillips screwdriver - 8 and 10mm open wrenches - Universal Chain Tool with chain hook - 2 Tire Levers - Flypaper Glueless Patch Kit

Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Deep side skirts protect stanchions and dust seals from rocks and debris

- Trendy design - Includes pre-assembled MIK adapter plate - Suitable for the MIK system carrier or carrier plates - Volume: 35L - Bag Dimensions in cm: 37x15x37 - Water-repellent

The Benno XXL Trunk Bag adds 170L of covered load carrying capacity to the top of the Boost E and Carry On racks when used with with High Rail or Platform Rail rack add-ons. Velcro closure adjusts to the size of the cargo, or can be left open like a basket for hauling taller items. - Volume: 170 liters - Dimensions: 50cm x 59cm x 25-66cm (W x L x H) - Can be used with High Rail or Platform Rail

Add some flair and fun to kids' bikes with MSW Squeeze Horns. - Fits standard 22-26mm diameter handlebars - Approximately 3" wide

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Every commuter bike needs a good bell, and this is it: It's a Brass Bell. It's small, it's loud, it's not ostentatious, It's a Brass Bell. Greet your friends, alert pedestrians, put a ring on it! - Fits 22.2mm handlebars

- Double sided high visibility material - Safety orange color - Flexible 2-piece mounting pole - Standard axle mounting bracket included - Red reflector

Epic offroad bike tours require you to bring all the essential tools and gear to keep from being stranded in the middle of nowhere. Designed to employ the unused space in your frame, MidLoader carries the heaviest items for your bike adventure. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly with hook-and-loop fasteners. Two water-resistant zippered openings provide easy access to all your gear from either side. - Material: Polyethylene / nylon lightweight, durable, water repellent and stain resistant - Bag Attachment: Hook-and-loop fastener - Top Tube Diameter: Fits 45 - 66mm - Down Tube Diameter: Fits 38 - 70mm - Seat Tube Diameter: Fits 28 - 60mm Size - 3L: 37.5 x 12 x 6cm / 14.8" x 4.7" x 2.4" - 4.5L: 46 x 12 x 6cm / 18.1" x 4.7" x 2.4" - 6L: 54.5 x 13.5 x 6cm / 21.5" x 5.3" x 2.4" Weight - 3L: 277g / 9.77oz - 4.5L: 292g / 10.30oz - 6L: 337g / 11.89oz

- Backpack and pannier all in one - Waterproof material and welded seams - Perfectly suitable for your e-bike - Includes Hook-On system for attachment to your luggage carrier

The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers - Disc adaptor spacers (60mm & 65mm widths only) Specific compatibility w/Planet Bike Fenders: - 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore) - 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full) - 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore) - 65mm Width: 29-inch x 65mm (Cascadia)