Brakes

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

Hayes Pro bleed kits include dual syringes and high quality fittings for precise, repeatable bleeds. D.O.T. Brake Fluid Dual Syringe Pro Bleed Kit - Includes 4oz of high performance Hayes DOT 4 brake fluid - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes DOT 4 brakes - Reusable plastic container with locking lid Venom Mineral Oil Dual Syringe Pro Bleed Kit - Includes 2oz of high performance Hayes Venom mineral oil - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes Venom mineral oil brakes - Reusable plastic container with locking lid

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options. - Fits 7/8" bars, has a hinged bracket, and does not include cable knarps

For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.

Perfect for your road, touring or cross bike, Avid's BB5 Road brakes have all the power you need. Used with your road-style levers, they sport precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

- 107mm arch gives a better mud guard clearance - Updated rubber boots - Strong braking power with excellent braking control

- Shimano, BR-7900 R55C3 Replacement cartridge pads, pair - Also fits BR-6700 and BR-5700

- XTR M9120 brake lever and M9120 4-piston hydraulic disc brake caliper - Increased stopping power & improved modulation for greater dowhnill confidence and control - Additional contact point on handlebar increases stiffness by 8% vs BL-M9020 - Quicker engagement & shorter, adjustable free stroke - ServoWave technology - Toolless adjustable reach - Pre-assembled with SM-BH90-SBM high power hose - Includes N04C metal pads w/ fins - Weight: 385g per side (lever, caliper, hose & RT-MT900 rotor)

- All-weather compound - Threaded posts - Hardware included - Pair

- High-performance Giga Power compound - Threaded posts - Hardware included

- 4 pistons in the front for maximum braking power - 2 pistons in the rear for perfect modulation - Thanks to the new 1-finger HC Carbon lever blade it just weighs about 230g (average value) - Suitable for mounting left or right - Position: Front and Rear - Hydraulic Hose Length: 2200mm - Fluid: Mineral oil

- The same performance as the high-end MT8 SL model at an attractive price - Equipped with a 1-finger HC aluminium lever blade - Suitable for mounting left or right

- BMX aluminum levers for caliper or U-brakes - 2-piece hinged clamp

Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance. Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 310g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length

The Magura MT5 HC Disc Brake and Lever set offers excellent braking performance at an unbeatable pricepoint. - The 4-piston brake caliper forged in one piece has a high degree of rigidity, resulting in outstanding braking force and the best possible modulation - Flip-flop lever design works on right or left side with either brake - 1-finger lever blade

Magura speed sensor magnet for disc rotor. - Compatible with Magura Storm HC 180mm rotor - Compatible with Magura MDR-C 180mm and 203mm rotors

Magura Storm CL Disc Brake Rotor - Centerlock with lockring for thru axle

Cover kits for Magura brake levers.

Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.

Cover kits for Magura brake levers.

Magura Storm SL.2 Rotor - 6-bolt silver The Storm SL.2 disc brake rotor combines minimal weight with excellent braking performance. Perfect for sporty use.

Shiftmix adaptors allow a shifter to clamp directly to a Magura brake lever, expanding setup possibilities.

Magura mdr-c disc brake rotor - 203mm 6-bolt for ebike silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design

9 Series Disc Brake Pads - One piece connected back plate - Comfort compound offers greater modulation and longer wear life than the Performance compound, but less power - Pair of disc brake pads for one MT5, MT7 caliper

Magura mdr-c ebike disc rotor - 203mm center lock w/ lock ring for quick release axle silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design - Equipped with a center lock mount for corresponding hubs - Center Lock with lockring for quick-release-axle (internal tool intervention)

- 410 Stainless steel construction - (6) Black M5 mounting bolts - Weights: 68g (140mm) / 85g (160mm) / 112g (180mm)

The Kool-Stop City Threaded Rim Brake Pad is a center post pad that offers great breaking performance to a wide range of riding styles. These pads are a great option for city bikes and steel rims. - Internal backbone - Thicker pad - The standard black compound is great for all weather conditions, but designed for dry condition riding

PR1400 OXiC Disc Brake Pads - Brake pad inserts are made by Swiss Stop